Jump to content

Featured Replies

  • Author
comment_9520

Motherboard- Asus M4A78LT-M-LE

Processsor- AMD Athlon II x4 635

Gfx- MSI R5770-PMD1G

PSU- Cooler Master 450W

Ram- 2x2GB DDR3 Cosair

Colling Fan- 2 Inbuilt side Fans, one front fan... using this cabinet

Temps- check attachments

vCore voltage- check attachments

The Temps r too high u cant overclock u need a better Cooler :|

+ Use MSI Afterburner to Overclock GPU!!

  • Author
comment_9525

I thought AfterBurner is only for nVidia GPUs...

naah itz for all GPU's

@tristar2

More info:

CPU

Set The CPU Voltage to Auto in BIOS

And Increase the FSB to 210-220,test the temps!! With Prime95

If it goes beyond 70*C then itz not OK

GPU

Set these in Afterburner minimal Overclock :)

GPU core: 950 MHz (+ 100MHz)

Memory: 1360 MHz (+ 160MHz)

comment_9535

The Temps r too high u cant overclock u need a better Cooler :|

+ Use MSI Afterburner to Overclock GPU!!

naah itz for all GPU's

@tristar2

More info:

CPU

Set The CPU Voltage to Auto in BIOS

And Increase the FSB to 210-220,test the temps!! With Prime95

If it goes beyond 70*C then itz not OK

GPU

Set these in Afterburner minimal Overclock :)

GPU core: 950 MHz (+ 100MHz)

Memory: 1360 MHz (+ 160MHz)

thanks for the quick response, will sure try the recommendations

  • Author
comment_9737

actually temperatures are fine till 3.75, the max i could hit on this intel board. But after that its no boot, and i dont want to volt mod it. because its risky, not as easy as BSEL which i am using

Thtz right!! Therez almost a 2-5% improvement and a 50-60% danger so do the maths nd it proves itz not worth the try :P Ignore it :P

  • 1 month later...
comment_13110

See, this is the only info I could find out.. CPU - Mobile Intel Pentium T2080 (Yonah DC) Motherboard - Lenovo F50X RAM - 3072 MB (actually 3068) DDR2 SD RAM Graphics - Mobile Intel® 945 Express Chipset Family GPU - i945GM Revision - A3 GPU Clock - 400 Mhz Temp. - 45% load, laptop switched on since 8 hours - 59 degree Celsius I hope this thing can be OCed. :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...